iBIO PLATRA

iBIO PLATRA is an universal product composed of building lime that has it ‘all-in-one’ (bonding, base and finish coat). On sane substrates (regular masonry in brickwork or natural stone, silicate stone,…) the product can bond and can give the finished appearance at the same time. On lime-hemp and concrete it is recommended to use a different bonding coat first (iBIO SPAT).
Once dried out it can be covered with a lime wash or silicate paint.
The thickness varies between 3 and 30 mm.

Consumption : 14 kg/m²/cm
Pallet content : 60 x 20 kg = 1200 kg

iBIO SPAT

iBIO SPAT will enhance the adhesion properties of an irregular surface to enable the bonding of the base coat of the plaster system.
The thickness varies between 0 and 3 mm.

Consumption: 2,5 – 3,5 kg/m²
Pallet content : 50 x 20 kg = 1000 kg

iBIO BODY

iBIO BODY is the base coat of the plaster system. This coat is applied to obtain a flat surface in preparation for the finish coat.
The average layer thickness is approx. 10 mm.
(greater thicknesses are possible in multiple layers with 1 – 2 days beween coats)

Consumption : 12 – 16 kg/m²/cm
Pallet content : 50 x 20 kg = 1000 kg

iBIO FINISH

iBIO FINISH is the finish coat which will give the final appearance to the plaster system. This can be applied in several ways : flattened, sponged, polished and painted with a lime wash or silicate paint.
The thickness is approx. 3 mm.

Consumption : 5 kg/m²
Pallet content : 60 x 20 kg = 1200 kg